Description

Parameters  

Battery Input Parameters
Battery Type	Lithium battery or Lead-acid battery
Rated Battery Voltage (V)	48V
Max Charging Voltage (V)	≤60V (configurable)
Max Charge/Discharge Current (A)	210A	250A	280A
PV Input Parameters
Max PV Input Power (kW)	20kW	24kW	30kW
Max PV Input Voltage (V)	1000V
MPPT Voltage Range (V)	200~800V
Start-up Voltage (V)	150V
Max Input Current (A)	36A/18A	36A/18A	36A/20A
MPPT Quantity	2	2	2
AC Output Parameters (On-grid)
Max Apparent Output Power (VA)	11000	13200	16500
Rated Output Voltage (V)	230/400 3W+N+PE
Rated Output Frequency (Hz)	50/60Hz
Rated Output Current (A)	16.7A	20A	24A
Output Power Factor	1 (0.8 leading ~ 0.8 lagging)
AC Output Parameters (Off-grid)
Rated Output Power (W)	10000	12000	15000
Peak Output Power (W)	>200%, 15 sec
Rated Output Voltage (V)	230/400 3W+N+PE
Rated Output Frequency (Hz)	50/60Hz
Rated Output Current (A)	16.7A	20A	22.8A
Efficiency
Max Efficiency (PV)	98%
Max Efficiency (Battery)	94.5%
European Efficiency	97.5%
Protection
PV Input Reverse Polarity Protection	Integrated
PV Insulation Resistance Detection	Integrated
Residual Current Detection	Integrated
Output Overcurrent Protection	Integrated
Output Short Circuit Protection	Integrated
Output Overvoltage Protection	Integrated
General Parameters
Operating Temperature (°C)	-25~60°C (>45°C derating)
Storage Temperature (°C)	-30~65°C
Relative Humidity	0~95%
Operating Altitude (m)	≤4000m (>2000m derating)
Cooling Method	Smart air cooling
Noise (dB)	<55dB
Weight (kg)	38kg	38kg	43kg
Dimensions (W*H*D mm)	683*475*256	683*475*256	750*475*256
IP Rating	IP66
Topology	High-frequency isolation (battery side)
Safety / EMC Certification	IEC62109, IEC61000, IS16169 & IS16221 (BIS)
Grid Certification	IEC61727, EN50549-1, VDE-4105, NRS-097-2-1, OVE-Richtlinie R25, UNE217001/2, Ordinance No.140
Other Certifications	IEC61683, IEC62116, EN50530, IEC60068

Summary         

Three-phase IP66 hybrid inverter series (8kW–15kW) is designed for high-demand residential and light commercial solar energy storage systems.

With strong surge capability (>200% for 15 seconds), high PV input capacity and 48V battery architecture, it delivers reliable performance for heavy loads, industrial equipment and large household applications.

Built for outdoor installation and harsh environments, this series integrates PV, grid, generator and battery management into one intelligent energy platform.

Powerful. Stable. Ready for demanding energy applications.

Application  

Large residential homes & villas

Small commercial buildings

Workshops & retail stores

Agricultural facilities

Areas with unstable or weak grid

Backup power systems

Hybrid solar + generator systems

Projects requiring three-phase output

Features  

High Power & Strong Surge Capacity

8kW / 10kW / 12kW / 15kW models available

200% surge capacity (15 seconds)

Designed for heavy-load equipment

Three-phase output for balanced power distribution

High PV Input Capability

Up to 20kW / 24kW / 30kW PV input (model dependent)

Dual MPPT design

Wide MPPT voltage range (200–800V)

Optimized for high-power PV arrays

48V Battery Architecture

Safer low-voltage battery system

Supports lithium & lead-acid batteries

High charging current (up to 280A depending on model)

Smart BMS compatibility

🌦 IP66 Outdoor-Ready Design

IP66 protection level

Suitable for harsh environments

Wide operating temperature range (-25°C to 60°C)

Smart air cooling system

🔄 Flexible Energy Management

Grid-tied & off-grid operation

Generator input supported

Time-of-use charging & discharging

Self-consumption optimization

🛡 Comprehensive Protection & Compliance

Built-in PV reverse polarity protection

AC overcurrent & short-circuit protection

Certified to international standards

Designed for long-term stable operation

Smart Monitoring

RS485 / CAN / USB communication

Optional WiFi / GPRS module

Remote monitoring via APP